Acrolink Original = 7NCu D.U.C.C. Stressfree, with crystal grains reaching an unprecedented height with extreme size and directional alignment. Inheriting the new Acrolink golden ratio of wire diameter and architecture achieved by 7N-PC4030Anniversario to bring out the performance of high-end components. Hot/cold (7NCu) and earth (4NCu) are all single wire with a diameter of 0.37c/)X50. Squalane oil is evenly applied to each individual wire, providing even more powerful realism from the mid to ultra-low frequencies. The pitch of the cello and double bass, which play the melody that was perfected through the exploration of the "Ode to Joy" in Beethoven's Ninth Symphony, is supported with a clear and rich sound. Transparency throughout the entire frequency range is further improved, and the linear spatial expansion of the reverberation component in three dimensions, as well as the resolution and descriptive power at the microscopic level, have evolved significantly.
In the digital era, the noise environment of audio equipment has changed dramatically. The quality and quantity of noise generated by digital circuits, which did not exist in the analog era, require measures that were not needed before. Acrolink has been tackling this issue early on and has positioned the shielding of power cables as the second theme in addition to vibration countermeasures. Electromagnetic wave-absorbing non-magnetic thread and silk thread are installed at the center of the three conductors. A shield layer made of tape (copper foil), which can constitute a "surface" instead of a "net," is installed on the outer circumference of the inner sheath. It completely prevents the intrusion of external noise. The copper foil tape and drain wire are grounded to the plug's earth, establishing an extremely clean power supply to the equipment through the electric field shield effect.
A major feature of Acrolink audio cables is that they consistently use polyolefin-based resin with particularly excellent insulation and vibration properties as the sheath material. Polyolefin-based resin is used as the insulating material for the conductor, which is properly twisted and angled. Furthermore, an intervening layer is made up of a polyolefin material in which a suitable mixing ratio of fine particle tungsten powder and amorphous powder, which were determined by numerous trials, is kneaded and fixed to the conductor for the purpose of blocking its own vibration and external vibration that occurs during transmission. Furthermore, an inner sheath made of polyolefin material blended with a special material with damping effect is formed around the intervening layer. The copper foil shield layer wound around this inner sheath has a double-thick coat of high-quality lead-free PVC to form the outer sheath, achieving even more effective vibration suppression. Its surface remains smooth and has a shiny white pearl finish, symbolizing the dignity of high-end cables.
Specifications
Conductor
7N Cu D.U.C.C. Stressfree x 2 (0.37×18 strands)
4N Cu for ground x 2 (0.37x50 strands)
Single Conductor size
5.36 Sq(AWG 10)
Insulation material
High molecular Polyolefin Resin (Black & White & Green)
1st Inner sleeve
High molecular Polyolefin + tungsten + amorphous + carbon powder
2nd Inner sleeve
Polyolefin with Resonance control powder
Shielding
Copper foil with drain wire
Outer sleeve
Lead free Polyvinyl Chloride
Conductor resistance
2.8mΩ/m
Cable diameter
15.7mm
Power plug & IEC connector
Contact parts
Beryllium copper
Plating
Silver layered rhodium(Polished before plating)
Body
Poly Butylene Terephtalate with glass fiber
Outer case
Polycarbonate
Welcome to leave your comments for other users' reference